Cutting machines pages

Streckfuss    Olamef    Piergiacomi    Depaneling    Cable machines
Logo Piergiacomi       

Piergiacomi hand cutter tools

Piergiacomi : complete range Flush cut Side-cutting pliers for electronic professionnal industry

        Flush cut
TR20M TR25P TR25 TR25L TR25 L25 TR5000PR TR30
TR30 58R TR5000R TR58R TTR58G ITR 30 ITR 58R ITRR 58G

        Strong tool - Chamfered cut                                        
ITRR 30 58 ITR 58 ITR 5000 TTR 5000 ITRR 58

        Height cut
TR 30 10 TR 30 15 TR 50 15 TR 50 20

        Reverse flush cut
TR 25 15 TR 25 15L

        Vertical flush cut        
TR5000W TR5000 10 TR5000 13 TR5000 15 TR3 15V




TR20M
TR 20 M - Small tool for a flush cut

  • The reduced head's dimension and its pointed shape, allow access to difficult to reach areas. Steel thickness 2.0 mm. Tool length 132mm. Safety clip for holding wire scraps securely after cutting available (order code TR 20 M A). Safety clip type AF.
  • Small head, steel thickness: 2.0mm.
  • Tool length 132mm
  • Ø copper wire0.81mm (AWG 20) / force 3KG.
  • Version ESD





    • TR25P
    TR 25 P - Small tool for a flush cut

  • With very sharp cutting edges, it is ideal for very delicate work in electronics, allowing access to difficult to reach areas. Safety clip for holding wire scraps securely after cutting available (order code TR 25 P A). Safety clip type AF.
  • Small head, steel thickness: 2.5mm.
  • Tool length 132mm
  • Ø copper wire1.02mm (AWG 18) / force 3.5KG
  • Version ESD





    • TR25
    TR 25 - Tool for a flush cut

  • One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order code TR 25 A). Safety clip type AF.
  • Steel thickness:2.5mm.
  • Tool length 138mm
  • Ø copper wire 1.30mm (AWG 16) / force 5KG
  • Version ESD





    • TR25L
    TR 25L - Long tool for a flush cut

  • Same characteristics as TR 25, but specially designed with longer handles to reduce the force needed by the operator. Safety clip for holding wire scraps securely after cutting available (order code TR 25 L A). Safety clip type AF.
  • Steel thickness: 2.5mm.
  • Tool length 160mm
  • Ø copper wire1.30mm (AWG 16) / force 3KG
  • Version ESD





    • TR25-L25
    TR 25 L25 - Tool for a flush cut at 25° angle

  • The special 25° angle allows the use in difficult to reach areas and its longer handles reduce the force needed by the operator. Safety clip for holding wire scraps securely after cutting available (order code TR 25 L 25 A). Safety clip type AF.
  • Steel thickness:2.5mm.
  • Tool length 160mm
  • Ø copper wire1.30mm (AWG 16) / force 3KG
  • Version ESD





    • TR5000PR
    TR 5000 PR - Strong tool for a flush cut

  • With very sharp cutting edges it allows access to difficult to reach areas. Safety clip for holding wire scraps securely after cutting available (order code TR 5000 PR A). Safety clip type AF.
  • Steel thickness: 5.0mm.
  • Tool length 138mm
  • Ø copper wire1.30mm (AWG 16) / force 5KG
  • Version ESD





    • TR30
    TR 30 - Tool for a flush cut

  • One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order code TR 30 A). Safety clip type AL.
  • Steel thickness: 3.0mm.
  • Tool length 138mm
  • Ø copper wire1.30mm (AWG 16) / force 5.5KG
  • Version ESD





    • TR30-58R
    TR 30 58R - Stong tool for a flush cut

  • Due to the special treatment of the blades, it is suitable for cutting ferrous material. Safety clip for holding wire scraps securely after cutting available (order code TR 30 58 R A). Safety clip type AL.
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Ø copper wire1.63mm (AWG 14) / force 6.5KG
  • Version ESD





    • TR5000R
    TR 5000 R - Strong tool for a flush cut

  • Safety clip for holding wire scraps securely after cutting available (order code TR 5000 R A). Safety clip type AF.
  • Steel thickness: 5.0mm.
  • Tool length 138mm
  • Ø copper wire2.00mm (AWG 12) / force 8KG
  • Version ESD





    • TR58R
    TR 58 R - Tool for a flush cut.

  • The special treatment of the blades make this tool particularly suitable for the cutting of ferrous material. Safety clip for holding wire scraps securely after cutting available (order code TR 58 R A). Safety clip type AL.
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Ø copper wire2.05mm (AWG 12) / force 9KG
  • Version ESD





    • TRR58G
    TRR 58 G - Very strong tool for a flush cut

  • Tool suitable, apart from work in electronics, also to be used in the jewellery's and for the cutting of rubber seal.
  • Steel thickness:3.0mm.
  • Tool length 160mm
  • Ø copper wire 2.59mm (AWG 10) / force 15KG
  • Version ESD





    • ITR30
    ITR 30 - Strong tool for a flush cut

  • pecial INDUCTION treatment of blades. For the cutting of copper and ferrous materials. Safety clip for holding wire scraps securely after cutting available (order code ITR 30 A). Safety clip type AL.
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Copper : Ø wire 1.30mm (AWG 16)
  • Ferrous wire : Ø wire1.02mm (AWG 18)
  • Version ESD





    • ITR58R
    ITR 58 R - Strong tool for a flush cut

  • Special INDUCTION treatment of blades. For the cutting of copper and ferrous materials. Safety clip for holding wire scraps securely after cutting available (order code ITR 58 R A). Safety clip type AL.
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Copper : Ø wire 2.05mm (AWG 12)
  • Ferrous wire : Ø wire 1.63mm (AWG 14)
  • Version ESD





    • ITRR58G
    ITRR 58 G - Strong tool for a flush cut

  • Special INDUCTION treatment of blades. For the cutting of copper and ferrous materials. Steel thickness:3.0mm.
  • ITRR 58G : Tool length 160mm
  • Copper : Ø wire 2.59mm (AWG 10)
  • Ferrous wire : Ø wire 1.63mm (AWG 14)
  • Version ESD





    • ITR3058
    ITR 30 58 - Strong tool for a chamfered cut.

  • Outil pour une coupe chanfreinée .
  • Traitement spécial des lames par INDUCTION pour la coupe du Copper et des matériaux ferreux
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Copper : Ø wire1.63mm (AWG 14)
  • Ferrous wire : Ø wire1.30mm (AWG 16)
  • Version ESD





    • ITR58
    ITR 58 - Strong tool for a chamfered cut

  • Special INDUCTION treatment of blades. For the cutting of copper and ferrous materials. Safety clip for holding wire scraps securely after cutting available (order code ITR 58 A). Safety clip type AL.
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Copper : Ø copper wire 2.05mm (AWG 12)
  • Ferrous wire : Ø copper wire 1.63mm (AWG 14)
  • Version ESD





    • ITR5000
    ITR 5000 - Strong tool for a chamfered cut

  • Special INDUCTION treatment of blades. For the cutting of copper and ferrous materials. Safety clip for holding wire scraps securely after cutting available (order code ITR 5000 A). Safety clip type AF.
  • Steel thickness:5.0mm.
  • Tool length 138mm
  • Copper : Ø wire 2.05mm (AWG 12)
  • Ferrous wire : Ø wire 1.63mm (AWG 14)
  • Version ESD





    • TTR5000
    TTR 5000 - Strong tool for a chamfered cut

  • Special TUNGSTEN treatment of blades. Ideal for the cutting of copper, ferrous materials and other hard components such as steel. Safety clip for holding wire scraps securely after cutting available (order code TTR 5000 A). Safety clip type AF.
  • Steel thickness:5.0mm.
  • TTR 5000 : Tool length 138mm
  • Copper : Ø wire 2.05mm (AWG 12)
  • Ferrous wire : Ø wire 1.63mm (AWG 14)
  • Steel : Ø wire 0.6mm (AWG 22)
  • Version ESD





    • ITRR58
    ITRR 58 - Strong tool for a chamfered cut

  • Special INDUCTION treatment of blades. For the cutting of copper and ferrous materials.
  • Steel thickness:3.0mm.
  • ITR 58 : Tool length 160mm
  • Copper : Ø wire 2.59mm (AWG 10)
  • Ferrous wire : Ø wire 1.63mm (AWG 14)
  • Version ESD





    • TR30 10
    TR 30 10 - Tool for a clean, flush cut, height cut 1 mm

  • Conceived for cutting component wires 1mm from the surface.
  • Steel thickness:3.0mm.
  • Tool length 138mm
  • Copper : Ø wire 1.30mm (AWG 16)
  • Force : 5.5 KG
  • Version ESD





    • TR3015
    TR 30 15 - Tool for a clean, flush cut, height cut 1.5 mm

  • It cuts the component lead at 1.5mm from the surface.
  • Steel thickness: 3.0mm.
  • Tool length 138mm
  • Copper : Ø copper wire 1.30mm (AWG 16)
  • Force : 5.5 KG
  • Version ESD





    • TR5015
    TR 50 15 - Strong tool for a clean and flush cut, height cut 1.5 mm

  • It cuts the component lead at 1.5 mm from the surface.
  • Steel thickness:5.0mm.
  • Tool length 140mm
  • Copper : Ø copper wire 1.60mm (AWG 14)
  • Force : 8 KG
  • Version ESD





    • TR5020
    TR 50 20 - Strong tool for a clean and flush cut, height cut 2 mm

  • It cuts the component lead at 2 mm from the surface.
  • Steel thickness:5.0mm.
  • Tool length 140mm
  • Copper : Ø copper wire1.60mm (AWG 14)
  • Force : 8 KG
  • Version ESD





    • TR2515
    TR 25 15 - Tool for a reverse flush cut, height cut 1.5 mm

  • Terminal wire cut at 1.5mm from the surface.
  • Steel thickness: 2.5mm.
  • Tool length 138mm
  • Ø copper wire1.30mm (AWG 16) / force 5KG
  • Version ESD





    • TR2515L
    TR 25 15 L - Tool for a reverse flush cut, height cut 1.5 mm

  • Terminal wire cut at 1.5mm from the surface. Same characteristics as TR 25 15, but designed with longer handles reduce the force needed by the operator.
  • Steel thickness: 2.5mm.
  • Tool length 160mm
  • Ø copper wire1.30mm (AWG 16) / force 5KG
  • Version ESD





    • TR5000W
    TR 5000 W - Tool for a front, flush cut, for working in difficult to reach areas.

  • It is possible to adjust the cutting height from the surface (from 0 to 5mm).
  • Steel thickness:5mm.
  • Tool length 147mm
  • Ø copper wire 1.30mm (AWG 16) / force 3.5KG
  • Version ESD





    • TR5000-10
    TR 5000 10 - Tool for a front cut, ideal for access in difficult to reach areas.

  • It cuts the component lead at 1mm from the surface.
  • Hauteur de la coupe fixe de 1 mm
  • Steel thickness:5mm.
  • Tool length 147mm
  • Ø copper wire1.30mm (AWG 16) / force 5.5KG
  • Version ESD





    • TR5000 13
    TR5000 13 - Tool for a front cut, ideal for access in difficult to reach areas of PCBs.

  • It cuts the component lead at 1.3mm from the surface.
  • Steel thickness:5mm.
  • Tool length 147mm
  • Ø copper wire1.30mm (AWG 16) / force 5.5KG
  • Version ESD





    • TR5000 15
    TR 5000 15 - Tool for a front cut, ideal for access in difficult to reach areas of PCBs.

  • It cuts the component lead at 1.5mm from the surface.
  • Steel thickness:5mm.
  • Tool length 147mm
  • Ø copper wire1.30mm (AWG 16) / force 5.5KG
  • Version ESD





    • TR30-15
    TR 30 15 - Tool for a perfect clean and flush cut.

  • It cuts the component lead at 1.5mm from the surface.
  • Steel thickness:3mm.
  • Tool length 144mm
  • Ø copper wire1.02mm (AWG 18) / force 3KG
  • Version ESD