Streckfuss Olamef Piergiacomi Depaneling Cable machines
Olamef machines list
![]() |
OLAMEF TP6 - TP6EC - TP6V | ||||
![]() ![]() ![]() |
|||||
![]() |
Cut and bend machine for axial components in tape.
The standard version is designed for leads with lead diameters from .015 - .051" (0.4-1.3mm). Other versions available for reduced bend from body, fixed pitches (.2", .3", .4" or 5.08mm, 7.62mm, 10.16mm) and for heavy leads (up to .055" or 1.4mm) TP6: Case in cast TP6EC: Case in strong steel (economic model) |
![]() |
OLAMEF TP6 PRF | ||
![]() |
|||
![]() |
Cut and bend machine for axial components in tape.
Various dies are available for each version for all type of shapes Three versions are available depending on the lead diameter of the components: option automatic setting lead diameter (Ref 97) option motorisation (Ref MOT98) |
![]() |
OLAMEF TP6 PRB | ||
![]() |
|||
![]() |
Cut and bend machine for axial components in tape.
Shape Stand off The form obtained is a Stand-off which keeps the body of the component off the board. No dies are required. option automatic setting lead diameter (Ref 97) option motorisation (Ref MOT98) |
![]() |
OLAMEF TP6/S | ||
![]() |
|||
![]() |
Cutting, bending and forming machine for axial components for SMD.
This is a special machine and it is necessary to obtain all dimensions when ordering. option automatic setting lead diameter (Ref 97) option motorisation (Ref MOT98) |
![]() |
OLAMEF TP6/V | ||
![]() |
|||
![]() |
Cut and bend machine for axial components for vertical mount.
Two main versions are available. The first one for components with lead diameters .019-.031" (0.5-0.8mm). The second one for thicker leads .031-.051" (0.8-1.3mm). Tooling for different pitches is available. option automatic setting lead diameter (Ref 97) option motorisation (Ref MOT98) |
![]() |
OLAMEF TP6/V-PR | ||
![]() |
|||
![]() |
Cut, bend and form machine for axial components for vertical mount.
The standard form will lock the component into the PCB. Handles components with lead diameters from .019-.031" (0.5-0.8mm). Tooling for different pitches is available. option automatic setting lead diameter (Ref 97) option motorisation (Ref MOT98) |
![]() |
OLAMEF TP6R - TP6R EC | ||
![]() ![]() |
|||
![]() |
Cut and bend machine for axial components in tape.
The standard version is designed for leads with lead diameters from .015 - .051" (0.4-1.3mm). Other versions available for reduced bend from body, fixed pitches (.2", .3", .4" or 5.08mm, 7.62mm, 10.16mm) and for heavy leads (up to .055" or 1.4mm) TP6R: Case in cast TP6R EC: Case in strong steel (economic model) |
![]() |
OLAMEF TS1 | ||
![]() |
The TP/TS1 is a pneumatic machine for loose radial components.
There are over 20 standard interchangeable dies available. Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request. |
![]() |
OLAMEF TP RPR/ AS1 | ||
![]() |
|||
![]() |
Manual pneumatic machine
to cut & form radial taped components.
The upper movable die is controlled by the vertical stroke of the cylinder. The same die will form a variety of lead pitches without the need of any adjustments. There are 10 standard interchangeable dies available. Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request. |
![]() |
OLAMEF LN/100 | ||
![]() |
|||
![]() |
The TP/LN-100 is a pneumatic machine to cut loose radial components.
The upper stationary plate determines de cutting height, the standard is 0.125", 3.2mm. Additional plates to increase this height are available starting from .019" (0.5mm) The cutting area is 45x54mm. Lateral cuts at the most common pitches allow the easy handling of bent leads. The standard grid pattern accommodates most types of components. Special grid pattern plates can be provided upon request. |
![]() |
OLAMEF LN500/1 LN500/2 | ||
![]() |
|||
![]() |
The TP/LN-500 is a pneumatic machine to cut loose radial components by using a
guillotine type lower blade.
It can handle any type of radial component regardless of lead diameter, pitch and form. The upper plate thickness comes at a standard 0.125", 3.2mm. Additional plates can be ordered to increase the height, starting from 0.5mm. Two versions are available: TP/LN-500/1: Cutting area 2.09x1.7" (53x43mm) TP/LN-500/2: Cutting area 2.09x3.66" (53x93mm) |
![]() |
OLAMEF TP TC4 | ||
![]() |
|||
![]() |
Motorized cutting machine for loose radial components.
Adjustable speed. Easy and quick manual component feeding. Two belts hold the leads and feed them through the rotary blades. The cutting length can be adjusted by turning an allen screw located on the right from guide. TAPE PITCH The attachment BR3 can be added to the TP/TC4 to handle taped radial components. It is available for two types of tape hole pitch: 12.7mm (.5") or 15mm (.59"). |