CRB Air-Blow Tip Cleaners
These air blowers come in two variations, to be chosen depending on your application: the base CRB model with single-direction air current.
CRB-A2 Air-Blow Tip Cleaners
These air blowers come in two variations, to be chosen depending on your application: the CRB-A2 which blows air from both the front and back.
Sponges Rotary Iron Tip Cleaners SRC-3000
The SRC-3000's wet sponges rotate in one direction to clean the iron tip. Soldering material and debris drop into the reservoir below for easy clean-up.
Brush Rotary Iron Tip Cleaners SRC-500DC
This model's wet sponges can be programmed to rotate in both forward and reversed based upon I/O signal, allowing for a more thorough cleaning.
The stainless steel brush rollers rotate and remove oxides and are designed specifically for lead-free soldering.
CSS-2100 Micro Monitoring Camera
The micro cameras easily attach to the Apollo soldering robot. The function of the CMOS camera is for teaching and process monitoring.
Due to the miniature size, each camera can be easily integrated
||1/4 inch collor CCIQ II
||400 TV line
|Focus Distance (Min)
|Min. Vision Area
||~ 5mm(D) x 40mm(W)
|Focus Distance (Max)
||~ 100 mm
|Max. Vision Area
||~ 30mm(D) x 40mm(W)
||-10C~45C, 85% no condensation
||DC5~12V (AC 100~240V Multi Adapter)
||Attaching Bracket, Adapter, Power+Data Cable
SC+C301 Position Calibration System
This position calibration camera has been designed exclusively for use with our soldering robots
||J-CAT/ JS series (without GRT, SCD, DSV robots)
||Color CMOS sensor/ rolling shutter
||FPGA high-speed picture processing engine (Incorporating camera)
||7 kinds of pattern matching (with pre-processing filter)
|Registered Model Number
||50 models (with retry functions)
||Uses image correction software supported on Windows 7 and above
|Robot Coordinates Calibration
||X, Y, R axes
||Camera for position calibration, lens, ring lightning (white), mounting bracket, converter, PoE injector, LAN cable (3pcs), HDMI cable, LAN HUB (not including monitor, PC or PC cable for settings)
Automatic Tip Position Correction Unit F71RH / FW71RH
This optical sensor prevents misalignment of a
wearing iron tip.
Tip Thermometer TTM-140
The well-designed sensor allows for easy placement
and accurate readings for iron tips.
It achieves stable measurement within seconds.
Solder wire pre-heaterYPH-10
The stainless steel sleeve is equipped with two heaters to pre-heat the solder
wire as it is being fed.
This helps to prevent solder ball spattering by pre-heating
the solder wire & internal flux.
This is designed to be used with large diameter
solder wire and is effective in reducing tact/cycle time as well as improving quality
in lead free and tin/lead applications.
Nitrogen Gas Generator serie APN
Les générateurs APN sont conçus pour les robots de table
et sont disponibles en 2 modèles :
Our APN generators are designed for desktop robots and are available in 2 models: the APN-05, a small, permeable-membrane system generator which can be attached externally or built directly into it a robot; and the APN-12 PSA system generator, a high-performance model which can be used with multiple robots and has a compact design for improved portability.
Air Supply (only dry&clean air) 5~6Bar
Nitrogen Gas Flow 0.5 L/min
Nitrogen Gas Con 99% (when gas flow at 0.5L/min)
Dimensions (LxPxH) 110x200x100 mm
Air Supply (only dry&clean air) 6.5~7Bar
Nitrogen Gas Flow 1.2 NL/min
Nitrogen Gas Con 99.99%
Dimensions (LxPxH) 310x270x310 mm
Nitrogen Gas Generator serie KSM-MR6
This large, PSA system N2 gas generator has a color touch panel which controls the N2 concentration and displays the amount of fluid flow.
Air Supply (only dry&clean air) 7.5Bar
Nitrogen Gas Flow 100 NL/min
Nitrogen Gas Con 99.99%
Dimensions (LxPxH) 1260x420x1218 mm
Solder fumes irritate eyes, nose and throat of workers and can cause equipment failures if they accumulate on machinery. For these reasons, we recommend a fume extractor and offer several solutions for various production environments.