Robots Selective Wave Rework Solder bath Dross separator Wave frame Wave parts Iron soldering Wire feeder
OMEGA systems have been designed exclusively for automated soldering. These soldering units can be widely adapted for use in semi & fully automated systems, such as dial-table systems, conveyor systems, desk-top robots, linear actuators and your special purpose machines. Equipped with a large, color, touch-panel displays, these units are easily read and interacted with for programming, management, and host connection. And, with multiple-power support, these units can be used in areas without trans AC220V.
The OMEGA offers a whopping 297 soldering profiles, making it a solution for all types of soldering application challenges. Its 375 Watts heater also enables it to handle large thermal mass components.
Type |
OMEGA
|
TERRA
discontinued end 2021
|
LUNA discontinued end 2021 |
---|---|---|---|
Power |
AC85~264V (single phase)
|
||
Power Consumption
|
375W | 240W |
154W
|
Air Supply
|
0.4~0.5 MPa
|
||
Solder Type
|
0.4~2.0mm Select 1 type
0.4~1.6mm for ZSB 0.3mm (Optional) |
0.4~1.6mm Select 1 type
0.4~1.2mm for ZSB 0.3mm (Optional) |
|
Solder Conditions
|
297 Conditions (99 point, 99 slide, 99 special)
|
7 conditions (4 point, 3 slide)
|
|
Setting Temp.
|
0~500°C | ||
Heater Capacity
|
200W (max)
|
130W (max)
|
|
Solder Step
|
9 steps
|
||
Wait Temperature
|
100°C | 250°C (Adjustable) | |
External Start Box
|
Optional | ||
Controller Weight
|
3.8kg
|
4.3kg
|
3.5kg |
Feeder Unit Weight
|
1.3kg
|
||
Iron Unit Weight
|
0.8kg | ||
Components |
Omega, Luna or Terra Controller, RSP/RSL Iron Unit, Solder Wire Feeder, Solder
Wire
Feeding Tube, Iron Unit/Feeder Signal Cable, Air Tube for Iron Unit, Power
Supply Cable
|