Robots Selective Wave Rework Solder bath Dross separator Wave frame Wave parts Iron soldering Wire feeder
Brochure controlers LUNA TERRA
LUNA and TERRA systems have been designed exclusively for automated soldering. These soldering units can be widely adapted for use in semi & fully automated systems, such as dial-table systems, conveyor systems, desk-top robots, linear actuators and your special purpose machines. Equipped with a large, color, touch-panel displays, these units are easily read and interacted with for programming, management, and host connection. And, with multiple-power support, these units can be used in areas without trans AC220V.
The TERRA offers a whopping 297 soldering profiles, making it a solution for all types of soldering application challenges. Its 200 watt heater also enables it to handle large thermal mass components.
The LUNA is essentially a smaller, more specific version of the TERRA. With 7 soldering profiles to address both point and slide iron-tip soldering, and a 130 watt heater, the LUNA is a flexible and effective unit.
Type |
TERRA
|
LUNA |
---|---|---|
Power |
AC85~264V (single phase)
|
|
Power Consumption
|
240W |
154W
|
Air Supply
|
0.4~0.5 MPa
|
|
Solder Type
|
0.4~2.0mm Select 1 type
0.4~1.6mm for ZSB 0.3mm (Optional) |
0.4~1.6mm Select 1 type
0.4~1.2mm for ZSB 0.3mm (Optional) |
Solder Conditions
|
297 Conditions (99 point, 99 slide, 99 special)
|
7 conditions (4 point, 3 slide)
|
Setting Temp.
|
0~500°C | |
Heater Capacity
|
200W (max)
|
130W (max)
|
Solder Step
|
9 steps
|
|
Wait Temperature
|
250°C (Adjustable) | |
External Start Box
|
Optional | |
Controller Weight
|
4.3kg
|
3.5kg |
Feeder Unit Weight
|
1.3kg
|
|
Iron Unit Weight
|
0.8kg | |
Components |
Luna or Terra Controller, RSP/RSL Iron Unit, Solder Wire Feeder, Solder Wire
Feeding Tube, Iron Unit/Feeder Signal Cable, Air Tube for Iron Unit, Power
Supply Cable
|