Solder paste printing
VP2500HP CL22 COVER : PICK AND PLACE FOR PROTOTYPING AND SMD SMALL VOLUME
Pick and place robot for electronic board prototyping
VP2500HP CL22 with 2 heads "Full vision"
Machine dedicated to prototyping and small series of SMD electronic boards.
The machine's gantry is equipped with large XY axes with ball screws to ensure better
A camera on the head allows the teaching of pick and place points as well as
the pick up of the board.
Two fixed cameras are dedicated to the recentering of components.
The machine can accept up to 72 tape feeders.
Placement up to 0201, 24 x 24 mm integrated circuits with a pitch of 0.45 mm
SMT VP2500HP 2H CL32 - 2 heads
Two simultaneous placement heads
Real placement speed :
2000 cph (4500 cph max)
Component re-centring by two 0.3M pixel cameras.
Realignment of the board by fiducial marks patterns
Placement to Chip
SOIC, SSOIC, QFP integrated circuits at 0.45 mm pitch
Melf, mini melf, sot, mini sot, QFP up to 24 x 24 mm (option 30 x 30 mm)
Machine resolution +/-0.01mm in XY and 0.08º in rotation
Installation possible up to 72 x SMD 8mm feeder tapes.
Management of pieces of tape
Integrated circuits in stick
Feeders : in standard, 2 racks of 51 push feeders 8mm
-other configuration in 12 ou 16 mm on request
Base feeder plate of 32 CL
tray with 18 rails for piece of tape (9x8mm, 7x12mm, 2x16mm)
custom tray for IC's
4 feeder positions for vivratory feeder for a total of 28 IC sticks
option JEDEC tray support
Gantry : Ball Screw Spindle driven
XYZ travel area: 460 x 660 x 22 mm
XY working area: : 300 x 500mm (Maximum board size)
machine : 960 x 1132 x 520 mm / 165 kg
Power supplies: 220VAC -- Compressed air 6 bars
40 push feeders integrated
CL feeder base plate 32 positions
4 places for vivratory feeders
Strip feeder + Big IC tray installed
Glue dispensor option
Nozzles type Samsung CP45 CN030 CN040
Cassettes feeder CL8
CL12, CL16, CL24, CL32