Solder paste printing
VP2800HP CL22 : PICK AND PLACE FOR PROTOTYPING AND SMD SMALL VOLUME
Pick and place robot for electronic board prototyping
VP2800HP CL22 with 2 or 4 heads "Full vision"
Machine dedicated to prototyping and small series of SMD electronic boards.
The machine's gantry is equipped with XY axes with ball screws to ensure better repeatability.
A camera on the head allows the teaching of pick and place points as well as the pick up of the board.
Two fixed cameras are dedicated to the recentering of components.
The machine can accept up to 73 tape feeders.
Placement up to 0201, 24 x 24 mm integrated circuits with a pitch of 0.45 mm
SMT VP2800HP 2H CL22 - 2 heads
Two or four simultaneous placement heads
Real placement speed :
2000 cph (4500 cph max)
Component re-centring by two 0.3M pixel cameras.
Realignment of the board by fiducial marks patterns
Placement to Chip
SOIC, SSOIC, QFP integrated circuits at 0.45 mm pitch
Melf, mini melf, sot, mini sot, QFP up to 24 x 24 mm (option 30 x 30 mm)
Machine resolution +/-0.01mm in XY and 0.08º in rotation
Installation possible up to 73 x SMD 8mm feeder tapes.
Management of pieces of tape
Integrated circuits in stick
Feeders : in standard, 2 racks of 51 push feeders 8mm
SMT VP2800HP 4H CL22 - 4 heads
-other configuration in 12 ou 16 mm on request
Base feeder plate of 22 CL
custom tray for IC's
- option 18 rails for piece of tape (9x8mm, 7x12mm, 2x16mm)
- option 4 feeder positions for vivratory feeder for a total of 28 IC sticks
- option JEDEC tray support
Gantry : Ball Screw Spindle driven
XYZ travel area: 415 x 520 x 20 mm
XY working area: : 310 x 420mm (Maximum board size)
machine : 1000 x 1020 x 400 mm / 83 kg
Power supplies: 220VAC -- Compressed air 6 bars
Centering of components by cameras up to a FOV of 24x24mm
Tray with feeder support rail at the rear and right,
single feeder on the left, 1 rack of feeders on the right,
2 cameras for centring components, board holder.
Samsung nozzles CP45 CN030
Cassettes feeder CL8
CL12, CL16, CL24, CL32