Tool pre-forming PIERGIACOMI

TS30D : CLINCH ON PCB
A special tool that cuts and presses the component wire against the PCB in one operation.

PTR30LD : PITCH INCREASE
Tool that forms the component wire in a L shape and cuts off the residual part.

PTR30CD : AXIAL STAND OFF 3MM

AXIAL STAND OFF 4MM

Pliers which forms the component wire in a C shape and cuts off the residual part. Residual component lead's length 4mm.

PNR30D : AXIAL STAND OFF OUTSIDE KINK

PNR 30D : Special forming tool that C shapes the component wire. Bent at 45°.

PNG5000D : AXIAL STAND OFF OUTSIDE KINK LESS STRESS

PNG 5000D : Special tool for the forming of components in a C shape. Its special radius enables components to be formed with no stress.

PNR5000D : AXIAL STAND OFF OUTSIDE KINK ADJUTABLE

A special tool that cuts and forms the component wire in one operation. Length setting is carried out by means of a sliding stop (A min 4 max 16).

PNR5010D : RADIAL STAND OFF OUTSIDE KINK

Forming pliers that cuts and forms in a double opposite C shape the component wire in one operation. Length setting is carried out by means of a sliding stop (A min 4 max 16).

PN5040/7D : TRANSISTOR TO220 TO247 TO264 ... BENDING AT 90°
Special pliers which forms the component wire at 90°. With adjustable stop to adjust the forming distance (A). Max forming width 16mm to allow TO220 and TO247 forming components. This item combines both PN5040 and PN5040/5 articles.

PN5040/90D : TRANSISTOR TO220 TO247 TO264 ... CUT & BEND AT 90°

Special pliers which cuts and forms the component wire at 90° in one step. It is possible to adjust the length by means of a sliding stop.

PN5050D TRANSISTOR TO220 TO247 BENDING CENTRAL LEAD AT 5.81MM

Special tool for the forming of central lead of TO 220 with 3.81mm pitch.

PN5050/3D TRANSISTOR TO220 TO247 BENDING CENTRAL LEAD AT 5.08MM

Special tool for the forming of central lead of TO 247 and TO 220, 5.08mm pitch.

PN5050/04D : TRANSISTOR TO220 TO247 BENDING LATERAL LEADS AT 5.08MM

Special tool for the forming of side leads of TO 247 and of TO220, 5.08mm pitch.

PN5050/6D : TRANSISTOR TO220 TO247 BENDING AT 90° FOR FLAT MOUNTING

Special pliers that enables TO220 component leads to be bent at a 90° angle in a single operation, in such a way that the central lead will be 2.54mm longer than the side leads. It is possible to adjust the distance by a sliding foil (min. 3mm)

PN5050/10D : TRANSISTOR TO220 TO247 BENDING LATERAL LEADS AT 2.5MM

Special pliers designed to form the two TO220 and TO 247 side leads at 2.54mm pitch.

PN5050/14D : TRANSISTOR TO220 TO247 BENDING CENTRAL LEAD AT 3.0MM

Special tool for the forming of central lead of TO 220, 3.0 mm pitch.

PN5050/15D : TRANSISTOR TO220 TO247 BENDING CENTRAL LEAD AT 2.5MM

Special tool for the forming of central lead of TO 220, 2.5mm pitch.

PN 5050/16D : TRANSISTOR TO220 TO247 BENDING CENTRAL LEAD AT 3.80MM

Special pliers designed to form the TO 247 and TO220 side leads at 3.81mm pitch.

PN5050/17D : TRANSISTOR TO220 TO247 BENDING AT 90° FOR FLAT MOUNTING SUR LE DOS

Special pliers that enables TO220 component leads to be bent at a 90° angle in a single operation, in such a way that the central lead will be 3.81mm longer than the side leads. It is possible to adjust the distance by a sliding foil (min. 3mm)

PN5050/19D : TRANSISTOR TO220 5 LEADS BENDING CENTRAL LEAD AT 3.80MM

Special pliers designed to form the TO220 component leads (5 leads). It forms the 1-3-5 leads at 4mm pitch and the 2-4 leads at 1.5mm pitch.

PN5050/21D : TRANSISTOR TO220 5 LEADS BENDING 90° FOR FLAT MOUNTING

Special pliers that enables TO220 component leads (5 leads) to be bent at a 90° angle in a single operation, in such a way that 1-3-5 leads will be 2.54mm shorter than 2-4 leads. It is possible to adjust the distance by a sliding foil (min. 3mm).

PN5050/25D : TRANSISTOR TO92 LEADS BENDING CENTRAL LEAD AT 1.27MM

Special pliers designed to form the central lead of TO 92 with 1.27mm pitch.

PN5050/36D : TRANSISTOR TO220 5 LEADS BENDING LEADS 2 & 4 À 3MM
Special tool designed to form TO220 component (5 leads). It forms 2-4 leads at 3 mm pitch.

PN5050/37D : TRANSISTOR TO220 5 LEADS BENDING 90° FOR FLAT MOUNTING

Special tool that enables TO220 component leads (5 leads) to be bent at a 90° angle in a single operation, in such a way that 2 - 4 leads will be 2.54 mm shorter than 1- 3 - 5 leads. It is possible to adjust the distance by a sliding foil (min. 3mm)

PN5050/38D : TRANSISTOR TO220 5 LEADS BENDING CENTRAL LEAD AT 3.0MM

Special tool designed to form TO220 component (5 leads). It forms 1-3-5 leads at 3mm pitch.

PN5050/46D : TRANSISTOR TO220 5 LEADS BENDING 90° FOR FLAT MOUNTING

Special tool that enables TO220 component leads (5 leads) to be bent at a 90° angle in a single operation, in such a way that 2 - 4 leads will be 3.81 mm shorter than 1- 3 - 5 leads. It is possible to adjust the distance by a sliding foil (min. 3mm)

PN5050/47D : TRANSISTOR TO220 7 LEADS BENDING 90° FOR FLAT MOUNTING

Special tool that enables TO220 component leads (7 leads) to be bent at a 90° angle in a single operation, in such a way that 2 - 4 - 6 leads will be 2.54 mm shorter than 1-3-5-7. It is possible to adjust the distance by a sliding foil (min. 3mm)

PN5050/49D : TRANSISTOR TO92 BENDING CENTRAL LEAD AT 2.54MM

Special pliers designed to form the central lead of TO 92 with 2.54mm pitch. Steel thickness 5.0mm. Tool length 158mm.

PN5050/53D : TRANSISTOR TO220 5 LEADS BENDING LEADS 2 & 4 AT 2.54MM

Special tool designed to form TO220 component (5 leads). It forms 2-4 leads at 2.54mm pitch.

PN5050/54D : TRANSISTOR TO220 5 LEADS BENDING LEADS 1-3-5 AT 2.54MM

Special tool designed to form TO220 component (5 leads). It forms 1-3-5 leads at 2.54 mm pitch.

PN5050/60D : TRANSISTOR TO220 BENDING LEADS 1-3 AT 1.5MM & PATTES 2 À 3.5MM

Special pliers designed to form the TO-220 and the TO-247 leads. It forms the side leads at 1.5mm pitch and the central lead at 3.5mm.

PN5050/67D : TRANSISTOR TO220 7 LEADS BENDING 90° FOR FLAT MOUNTING

Special tool that enables TO220 component leads (7 leads) to be bent at a 90° angle in a single operation, in such a way that 2 - 4 - 6 leads will be 3.81 mm shorter than 1-3-5-7. It is possible to adjust the distance by a sliding foil (min. 3mm)

PN5050/77D : TRANSISTOR TO220 7 LEADS BENDING LEADS 2-4-6 AT 2.54MM

Forming pliers for the 7 leads TO220 component. It forms the 2-4-6 leads at 2.54mm pitch. Steel thickness 5.0mm. ESD-safe handles.

PNI5000D : FLAT MOUNTING IC TO92 ...

Special pliers which forms and cuts the IC pins in one operation.

PNI5015D : FLAT MOUNTING IC TO92 ...

Special tool for a clean and flush cut at adjustable height from the surface of a pins line. It is possible to adjust the distance by a sliding foil (min. 1,5 – max. 10 mm).