Lease possible equipment - Rent your CMS component counters for inventory
Compteur County Evo manual
Compteur County-S Evo automatic motorized
Compteur County Evo
County EVO is a microcomputer based instrument which counts axial, radial and SMD (with 8301.018 option) components.
Counting in both directions (left or right)
Divider from 1 to 19 (and multiplier 2,3,4 for 0402, 0201 and 01005 components)
Totalizer mode counting
Preset mode counting (with an audible alarm when the desired component number is reached)
Calibration test and self diagnostic procedure
Last counting value and condition memory
Models 8301.082 and 8301.084 with rechargeable battery, Barcode reader input, output for Printer/PC,
Watch, Datalogger with 500 counting records.
Maximum counting value: 899999 counts
Minimum lead diameter: 0.4mm
Axial component bandolier width: 55 - 110mm
Radial component bandolier width: max 18mm
Maximum component diameter : 14mm
Display: 4 digits 13mm height
Counter County-S Evo motorized
Motorized counter for taped SMD component counting. This machine works in a simple way by counting the holes on the tape.
It can operate in two different ways:
Totalizer: components are counted from a zero reference, tape feed is motorized and the counter automatically stops at the tape end, to prevent loss of the total.
Preset mode: the desired component number is keyed on the keyboard and the counter automatically stops when it reaches the corresponding component.
All functions are easy to operate by the help of interactive messages on the graphic display.
In the count screen are always visible:
- Counting direction
- Pitch number (holes per component)
- Working mode (Totalizer, Preset or Rewind)
- Name of the operator
- Components counted
- Date & Time or the last barcode reading.
Display: 6 digits high efficiency leds
Maximum counting speed: 220 pc/sec (1 piece per hole)
Accuracy: +/-1 piece
Holes per component: divider from 1 to 99 (and multiplier 2,3,4 for 0402, 0201 and 01005 components)
Maximum tape height: 56mm
Maximum reel diameter: 400mm (standard configuration), 650mm (with 8301.150 support)
Display: blue LCD with led backlight 160x104 pixel, visible area 74x46mm
Adjustable speed control
Step by step mode (1 component at a time)
Empty pocket check (optional)
Barcode reader input
Serial connection for label printer or PC
Selection of the operator (10 operators can be memorized with 8 alphanumerical chars everyone)
Internal clock (1 week backup)
Datalogger that stores the last 500 counting data
Memory storage for subtotals
2 side handles for easy transport.