Brochure C043 E & C043ES
Spare parts list C043 E & C043ES
To make the insertion of components with short leads into p. c.
boards possible, the leads have to be cut to suitable length, bend to
the required pitch and -if necessary- stamped.
Both, suitable length
and required pitch can be adjusted by adjusting screws. After this
set-up the components can be processed. Cutting length and pitch are
fully adjustable.
The stamping result for the leads depends on the used tool. Leadforming ist tool specific and can be manufactured to meet customer requirements.
The difference to the types C 043A and C 043E is the integrated Pneumatic which makes the rearrangement of the Bending- and Formingtools possible. This means, that the tools can be approached to the components. Espacially bendings with Flush-Mount-bead can be done.
The taped components can be processed automatically. The processing-speed is continuously variable. The tool change for different bending dimensions takes about 5 minutes.
| Specification | |
| - dimension | 600 mm x 480 mm x 450 mm |
| - weight | approx. 45 kg |
| - electrical | 230 V / 50 Hz / 200 W |
| - compressed air | 6 bar |
| - bending tool | horizontal bendings |
| - min. pitch | 7,5 mm |
| - max. pitch | 50 mm |
| - lead Ø | 0,4 mm to 1,3 mm |
| - components | taped |
| - production rate | 3.600 pcs/hr (continuously variable) |
| - Option | - manual supplyment for lose components |
| - digital display for pitch and cutlength | |
| - pre-set and item counter | |
| - survey for component-roll or ammo-pack | |
