VP-2800HP-CL64-4R : PICK AND PLACE FOR PROTOTYPING AND SMD SMALL VOLUME
Pick and place robot for electronic board prototyping
PICK AND PLACE SMALL SMT VP-2800HP-CL64-4R 4 heads "Full vision HD"
High precision machine
Machine dedicated to prototyping and small series of SMD electronic boards.
The machine's gantry is equipped with XY axes with ball screws to ensure better
A camera on the head allows the teaching of pick and place points as well as
the pick up of the board.
Two fixed HD cameras are dedicated to the recentering of components.
The machine can accept up to 99 tape feeders.
Placement up to 0201, 24x24mm integrated circuits (30x30mm as an option) with a
pitch of 0.45 mm
Four simultaneous placement heads
Real placement speed :
2000 cph (4500 cph max)
Component re-centring by two 3M pixel cameras.
Realignment of the board by fiducial marks patterns
Placement to Chip
SOIC, SSOIC, QFP integrated circuits at 0.45 mm pitch
Melf, mini melf, sot, mini sot, QFP up to 30x30mm
Machine resolution +/-0.01mm in XY and 0.08º in rotation
Installation possible up to 99 SMD 8mm tapes.
Management of pieces of tape
Integrated circuits in stick
It is possible to install up to 99 x 8mm SMD coils, custom or JEDEC tray
Gantry : Ball Screw Spindle driven
XYZ travel area: 665 x 655 x 20 mm
XY working area: : 350 x 300 mm (Maximum board size)
machine : 1300 x 1100 x 570 mm / 185 kg
Power supplies: 220VAC -- Compressed air 6 bars
In-line board conveyor option
Centering of components by cameras HD up to a FOV of 24x24mm or 30x30mm
Base plate for 62 individual pneumatic feeders of 8, 12 or 16mm. 3 cameras for
centering components, card holder.