ONE STRIP is a pneumatic wire stripper suitable for stripping single-core cables from 0.03 to 2 mm² and with the possibility of lengths from 1 to 20 mm.
Very simple and fast, it allows through micrometric adjustment knobs a precise stripping, both full and middle stripping, of single-core cables.
The supplied covers make ONE STRIP a safe equipment, as well as its size and its light weight make it suitable for use in many different situations.
Wire section: 0.05 to 1.65 mm² (32 to 14 AWG)
Stripping diameter resolution: 0.02mm (.0008 ")
Maximum insulation diameter: 3.2 mm (.125 ")
Stripping length: 1.5 to 20 mm (.062 "- .787?)
Stripping length resolution: 0.5 mm (1/6 ")
Middle-stripping resolution: 1 mm
Cycle time: Approximately 0.3 seconds
Stripping blades: Steel super-fast or Widia
Stripping wires: Small rope, semi-rigid, etc.
Insulation: PVC, Tefzel, Teflon, Kapton, etc.
Air pressure: 5 to 7 bar (75 - 105 PSI)
Air consumption: Approximately 00:28 LT / Cycle
Noise level: inf. 75 db
Machine dimensions: 220 (L.) X 60 (W.) X 160 (H) mm