2. Products
  3. Equipments for wire and cable treatment
  4. Crimping machines
  5. GLW EC65

GLW EC-65 - Crimping tool for all types of terminals

Cable equipment - A whole range crimping machines and accessories

GLW EC-65 - Electric crimping machine

  


EC65 The EC 65 is compact and lightweight, yet rugged enough for the factory floor.
It is well suited for complex cable harness assemblies.

The EC 65 is an ideal device to securely crimp wires and cable terminals such as:

  • Insulated cable lugs to 6 mm 2 / 10 AWG
  • Tubular cable lugs, solderless terminals to 10 mm 2 / 8 AWG
  • Flat tab terminals to 6 mm 2 / 10 AWG
  • Wire end sleeves to 50 mm 2 / 1 AWG

    The EC 65 can be operated in one of two modes.
    Mode 1: controls the entire crimp process by pressing down the pedal switch.
    Mode 2: allows the user to fix the terminal on the cable by activating the foot switch once. To finish the crimping process, he presses down the foot switch once again. Mode 2 is used for more complex terminals.

    The onset of compression force can be adjusted for each new terminal to satisfy crimp integrity. That way, damage to dies and terminals can be minimized.
    Simply press a button to select the opening for each die.
    Since some female terminals are more difficult to crimp, a moveable locator can be utilized to ensure proper crimping.
    Various standard dies are available, as well as dies designed to customer specifications.
    Accessories: Locator for crimping female disconnects / Its carrying handle converts the EC 65 into a portable crimping tool.

    Technical data EC 65
  • Max. press capacity 10 kN
  • Cycle time 1 s
  • Power supply 230V / 50Hz (115V / 60Hz)
  • Power consumption 160 VA
  • Dimensions (L x W x H) 320 x 140 x 220 mm
  • Weight 10 kg / 22 lbs

    Accessories
  • Crimping die sets for a wide variety of contacts
  • Positioning aids (locators) for contacts
  • Starter kit: Case with the most important die- sets
  • Special die sets to individual specifications
  • Sectional views for quality assurance




          Crimping tools
         

          Capot de protection
          A choisir en fonction de la mâchoire

    Locator for crimping male & female disconnects.
    Cosse clip Faston DIN 46245 46247 46248 2,8x5 2,8x6 4,8 6,3
    special tool needed for Molex, Tyco, TE Connectivity, AMP contacts ...



    Presentation EC-65
    Crimping in 1 step
    Crimping in 2 steps
    Crimping with locator

    Setup


      Dies, covers, locators
     
      Documentation EC65
     
      User manual
    EC-65



    Dies list  :


    Die EC-E0160 (old EC-E0360)
    Cable lugs 0,08 à 6 mm2
    0,08-0,14/ 0,25-0,34 / 0,5-0,75 / 1-1,5 / 2,5 / 4 / 6 mm²

    Die EC-E1025
    Embouts de cablâge nus ou isolés
    10 / 16 / 25 mm²

    Die EC-E1025L
    Cable lugs
    10 / 16 / 25 mm² Longueur 18mm

    Die EC-E3550
    Cable lugs
    35 / 50 mm²


    Die EC-R0508A
    Flat tab
    0,5 / 0,75 ²

    Die EC-R0515A
    Flat tab with angle
    1,0 / 1,5 ²

    Die EC-R0560
    Rolled contact
    1,5 / 2,5 / 6 mm²

    Die EC-R0115
    Rolled contact
    0,1-0,5 / 0,5-1,0 / 1,0-1,5 mm²


    Die EC-R0115E
    Rolled contact large crimping
    0,1-0,5 / 0,5-1,0 / 1,0-1,5 mm²

    Die EC-I1525F
    Insulated terminal
    1,5 / 2,5 mm²

    Die EC-I0115
    Insulated terminal, single crimp
    0,10 à 1,5 mm²

    Die EC-I0560
    Insulated terminal, single crimp
    0,5-1,0 / 1,5-2,5 / 4,0-6,0 mm²


    Die EC-I0560AS
    Insulated terminal, double crimp
    0,5-1,0 / 1,5-2,5 / 4,0-6,0 mm²

    Die EC-I1425UF
    Insulated terminal
    0,14-0,5 / 0,5-1,5 / 1,5-2,5 mm²

    Die EC-D0140
    Connector MC3
    0,14-1,0 / 1,5 / 2,5 / 4 mm²

    Die EC-D6099
    Connector MC3
    6 / 10 mm²


    Die EC-T0599Q
    Rolled contact MB & BY
    0,5-1,5 / 1,5-2,5 / 4,0-6,0 / 10 mm²

    Die EC-T0325
    Copper tubular contact
    0,25-0,75 / 1,0-1,5 / 2,5 mm²

    Die EC-T4099N / EC T4099E
    Copper tubular contact
    4 / 6 / 10 mm²

    Die EC-T4099F
    Copper tubular contact C/CT
    4 / 6 / 10 mm²


    Die EC-T4099P
    Crimping by compression
    4 / 6 / 10 mm²

    Die EC-T160Q
    Rolled contact MB & BY
    16 mm²




    Locator for Flat Tab Terminals (Open Barrel)


    Click on images for zoom
    Locator EC LOC 28L / 006778
    Female terminals 2.8 x 0.8
    Crimping dies EC I0560
    EC I0560AS / EC I0560TC

    Locator EC 0003 / 006771
    Female terminals 2.8 x 0.8
    Length 5 mm
    Crimping dies EC R0115
    EC R0115E / EC R0560

    Locator EC 0004 / 006772
    Female terminals 2.8 x 0.8
    Length 6 mm
    Crimping dies EC R0115
    EC R0115E / EC R0560




    Locator EC LOC 0002 / 006770
    Female terminals 4.8 x 0.8
    Crimping dies EC R0560
    EC R0115 / EC R0115E

    Locator EC LOC48L / 006780
    Female terminals 4.8 x 0.8
    Length 5 mm
    Crimping dies EC I0560
    EC I0560AS / EC I0560TC

    Locator EC 0001 / 006769
    Female terminals 6.3 x 0.8
    Crimping dies EC R0560




    Locator EC LOC 63L / 006782
    Female terminals 6.3 x 0.8
    Crimping dies EC I0560
    EC I0560AS / EC I0560TC

    Locator EC LOC100L
    Female terminals
    Crimping dies EC I0560
    EC I0560AS / EC I0560TC

    Locator EC LOC100LL / 006786
    Female terminals
    Crimping dies EC I0560
    EC I0560ASL




    Locator EC 009353
    Female terminals 6.3 x 0.8
    Crimping dies EC I1525F
    EC I1525UF

    Locator EC 008217
    Female terminals 6.3 x 0.8
    Crimping dies EC R0508A
    EC R1025A

    Locator EC 0006 / 006774
    Male terminal s 6.3 x 0.8
    Length 16 mm
    Crimping dies EC R0560




    Locator EC 0005 / 006773
    Male terminal s 6.3 x 0.8
    Length 8 mm
    Crimping dies EC R0560



      Documentation
    EC65
      User manual
    EC-65