• Return to menu other Streckfuss machines

    • Machine Cutting, Stamping and Forming for loose or belted axial components
    Type C 043 E

     
    Device

    components

    Bauteil Bauteil Bauteil Bauteil Bauteil
    Bauteil Bauteil Bauteil Bauteil Bauteil Bauteil Bauteil Bauteil
    Specification
    - dimension
    840 x 480 x 450 mm
    - weight
    approx. 45 kg
    - electricity
    230 V / 50 Hz / 200 W
    - bending tool
    horizontal and vertical bendings
    - pitch mini.
    horizontal: 7,5 mm, vertical: 2,5 mm
    - pitch maxi.
    horizontal : 50 mm, vertical : 5 (7,5) mm
    - Ø wire horizontal : 0,4 to 1,3 mm, vertical : up to 0,8 mm
    - components in tape
    - productivity 8.000 pcs/hr maxi. (adjustable)
    - Option - feeder for loose components
    - display, counter
    - support reel tape and carton ammopack

     

    Description C043E :

    The machine Type C 043 E is designed, to cut stamp and bend axial leaded components for both horizontal and vertical mounting.

    To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length, bend to the required pitch and -if necessary- stamped. Both, suitable length and required pitch can be adjusted by adjusting screws. After this set-up the components can be processed. Option: the adjustments can be checked by a digital display.

    The stamping result for the leads depends on the used tool. These tools can be manufactured to meet customer requirements. The machine can be re-set for the different tools.

    The taped components can be processed automatically. The processing-speed is continuously variable. The tool change for different bending dimensions takes about 2 minutes.
    [ return ]