Streckfuss    Olamef    Piergiacomi    Depaneling    Cable machines

Cutting and Bending Device Type C 034 for loose axial components


Streckfuss C 034

      Brochure C034/MIL & C034/S

olamef TP6

The machine Type C 034 is designed to cut and bend the leads of axial components to a 90º configuration.
Because of the independent adjustments for the lead span, the left cut length and right cut length, the device allows a wide variety of processing parameters.

The components are hand fed into the tooling. The component body has to be centered between the bending anvils.
After the Foot pedal is depressed, the component leads are clamped on both sides.
The leads are then cut to length and bend to the required form.
The processed component is then rejected by the front of the device.



Specifications
- dimension 200 x 200 x 280 mm
- weight approx. 6 kg
- air pressure 4 to 6 bar
- pitch mini C 034 S: 12,5 mm
C 034 MIL: 7,5 mm
- pitch maxi C 034 S: 100 mm
C 034 MIL: 100 mm
- Ø wire C 034 S: 0,8 - 1,4 mm
C 034 MIL: 0,4 - 0,8 mm
- components loose
- operation manuel via pneumatique foot pedal
- productivity 2.500 pcs/hr
C034
C034