Catalog ITECO
Vacuum bag sealers with external aspiration and vacuum tank sealers
Professional heat sealer with external aspiration VACUTEK (VACULAB)
With these economic and flexible machines is possible to package every length
of bag. The unit is hand operated and the degree of vacuum is achieved by the
operator valuation. The air is strongly sucked out from the bags opening, so it
is needed to use specific bags or to unfold the sides of the bags, so to
provide two little way out for the aspiration.
Vacuum bag sealer, external aspiration
7914.359
Seal length:
450mm
Vacuum pump:
dry 3m3/h
Heater covered with PTFE:
2x6mm
External dim:
490x390x220mm
Power supply:
230V/50Hz 600W
Noise:
<65dB
Vacuum tank sealers table models
Vacuum tank sealers are professional and automatically operated models, with
degree of vacuum set on the front panel by the operator.
All vacuum tank models are available with an optional "Inert Gas Injection".
All models have a diffusion Oil Bath Pump.
All table models have a stainless stell construction.
7914.262 Vacuum tank sealer - Seal length: 400x5mm -
Vacuum pump Oil bath: 20 m3/h - Chamber capacity:
410x400x90mm
7914.263 Thermosoudeuse sous vide à cloche - Seal length: 450x5mm -
Vacuum pump Oil bath: 20 m3/h - Chamber capacity:
460x450x90mm
The third dimensions in chambers capacity refers to the useful height at the
centre of the chamber.
VACUWELD 450-A - vacuum thermosealer with compressed air pump
Machine working with any type of bags for any high volume production.
Machine usable in clean rooms, with vacuum chamber made of stainless steel,
specially designed for trapping trays, tubes, strips and CMS coils.
The use of a compressed air pump (Venturi effect) minimizes noise, vibration
and warming.
Very precise programming of the vacuum, with control by a sensor placed in the
vacuum chamber.
Seal length :
460x10mm
Dim. util. chamber :
500x600x100(H)mm
Air pressure :
6 Nl/s à 6ATM
Power supply:
230V/50Hz 1000W
VACUWELD 450-O - Vacuum tank sealers VACUWELD with oil pump
The VACUWELD machines have been designed to avoid electrostatic charges, for
the use in ESD environments: stainless steel chamber, aluminium cover and
conductive wheels.
The use of an oil pump let the sealer to reach a high vacuum level (98%
measured at the sea level).
Very accurate adjustment of vacuum, controlled by an internal sensor.
7914.278 Vacuum tank sealer
7914.279 Vacuum tank sealer with inert gas injection (nitrogen)
Seal length :
460x5mm
Dim. util. chamber :
450x500x90(H)mm
Vacuum pump Oil bath :
20 m3/h
Power supply:
230V/50Hz 2000W
VIDEO VACUWELD